Używamy cookies aby ułatwić korzystanie ze sklepu. Zgodnie z dyrektywą dotyczącą prywatności w sieci, musimy zapytać o Twoją zgodę na zapisywanie plików cookies. Dowiedz się więcej.
2015 Infiniti Q50 3.7L V6 Gas Air Intake
Dolot powietrza - wysokoprzepływowy, aluminiowa rura - INFINITI Q50 V6-3.7L dla 2015 infiniti q50 3.7l v6 gas
All Models
2 397,59 zł
W magazynie
Podgląd
- Guaranteed to increase horsepower and torque.
- Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter.
- Engineered to provide high airflow and exceptional filtration.
- Replaces factory air filter and intake tube.
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions.
- Typical installation can be completed in 60 minutes or less with simple hand tools.
- No-Hassle Lifetime Limited Warranty.
- Will not void vehicle warranty.
Szczegółowe informacje
| Estimated Horsepower Gain | 6.17 HP @ 5473 RPM |
| Replacement Filter | RU-4960XD |
| Air Filter Color | Red |
| Air Filter Material | Cotton Gauze |
| Air Filter Outlet Shape | Round |
| Clamps Included | 8 |
| Clamp Material | Steel |
| Clamp Style | Regular |
| Couplers Included | 2 |
| System Type | Cold-Air Intake System |
| Estimated Torque Gain | 7.1 lbft |
| Product Style | 69 Series Typhoon Kits |
| Intake Pipe Color / Finish | Silver |
| Intake Pipe Material | Aluminum |
| Street Legal In All US States | Not legal for sale or use in California on any pollution controlled motor vehicle. |
| TUV Approved (Europe) | No |
| Weight | 13.3 lb (6 kg) |
| Product Box Height | 12.5 in (318 mm) |
| Product Box Length | 22.25 in (565 mm) |
| Product Box Width | 14.25 in (362 mm) |
| California Restricted | Not legal for sale or use in California |
| Mounting Hardware Included | Yes |
| Warranty | No-Hassle Lifetime Limited |
DIY Level
Łatwy Średni Zaawansowany
Tools Needed
Wrench, Extension, Flat Blade Screwdriver, Allen Wrench
Installation Time
60-90 Minutes
Cold Air Intake System dla 2015 infiniti q50 3.7l v6 gas
2 397,59 zł
W magazynie
Podgląd
- Increased horsepower
- Tuned and dyno-tested to improve acceleration and engine sound
- Two low restriction polyethylene air intake tubes
- Easy to install using commonly available tools
- Air filters last up to 100,000 miles before cleaning is required (depending on driving conditions)
- Washable and reusable oil-free filter media
Szczegółowe informacje
| Estimated Horsepower Gain | 10 HP @ 4500 RPM |
| Replacement Filter | 21-202DOSK |
| Air Filter Color | Red |
| Air Filter Material | Non-woven Synthetic |
| Air Filter Outlet Shape | Round |
| Clamps Included | 6 |
| Clamp Material | Carbon Steel |
| Clamp Style | Regular |
| Couplers Included | None |
| Product Style | AEM Cold Air Intake System |
| Intake Pipe Color / Finish | Black |
| Intake Pipe Material | High-Density Cross-Linked Polyethylene |
| CARB EO Number | D-670-25 |
| Street Legal In All US States | Not legal for sale or use in California on any pollution controlled motor vehicle. NOTE: Some specific models and years may be legal in CA. Check the CARB status on your parts at knfilters.com. |
| TUV Approved (Europe) | No |
| Weight | 12.5 lb (5.7 kg) |
| Product Box Height | 15 in (381 mm) |
| Product Box Length | 22.2 in (564 mm) |
| Product Box Width | 14.5 in (368 mm) |
| Mounting Hardware Included | Yes |
| Warranty | Limited Lifetime |
DIY Level
Łatwy Średni Zaawansowany
Tools Needed
Wrench, Extension, Flat Blade Screwdriver, Allen Wrench
Installation Time
60-90 Minutes
Zasoby:
PDF instalacji
Installation Instruction Sheet Dyno Chart - 2015 Infiniti Q50 3.7L - 10HP Increase
Search By Vehicle
Search By Dimension
Przedmiot, który dodałeś do koszyka, NIE PASUJE do Twojego pojazdu
Ten przedmiot pasuje do Twojego pojazdu
Przedmiot(y) poniżej pasuje(do) do Twojego pojazdu
